Ghodbunder Road, Thane, Maharashtra
- GST NO. : 27AHYPC3352L1ZV
Pressure
Leading Manufacturers, Exporters, Wholesaler, Retailer and Trader of Pressure Transmitter and Differential Pressure Transmitter from Thane.
| Business Type | Manufacturer, Supplier |
| Make | CBRO |
| Model | DPT8800 Series |
| Pressure range | -1~0~1bar; 0-1bar~0-2000bar |
| Over load | 150%FS |
| Burst pressure | 300%FS |
| Output | 4-20mA |
| Power supply | 12~36VDC |
| Response time | <5ms |
| Combine error | 0.5% FSO(Including Linearity, Repeatability & Hysteresis) |
| Pressure connection | M20×1.5, G1/2 , G1/4 ,1/2NPT （ customer tailor ） |
| Operating temperature | -20℃ ～ 85℃ |
| Temperature compensation | 0℃ ～ 60℃ |
| Electrical connector | Terminal Block |
| Explosion proof grade | ExiallCT4 |
Preferred Buyer From
| Location | Worldwide |
CBRO high performance pressure transmitter is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. It outputs a 4~20mADC signal corresponding to the measured pressure.Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via HART communications. Other key features include quick response, remote set-up using communications, self-diagnostics and optional status output for pressure high/low alarm.
- High accuracy, high stability
- Explosion proof grade ExibllCT4
- Local LCD display
This series product is suitable for the occasion of chemical fiber, environmental protection, medicine, industrial control and etc. It is used to measure the pressure or height of the liquid level of corrosive medium, such as acid, alkaline and so on.
Features:
- Stainless steel sealed construction
- Intrinsically safe
- Protection class-IP65
- Corosion resistant, with LCD display
- Short delivery time
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Measure Range | 0 ~ 1KPa ~ 3MPa |
| Indication Resolution | 0.075% |
| Ambient Temperature | -40 ~ 85 ℃ |
| Output Signal | 4-20ma analog output / with HART communication |
| Shell protection | IP67 |
| Diaphragm Material | Stainless Steel 316l, Hastelloy C, Support other Custom |
| Product Shell | Aluminum Alloy, the Appearance of Epoxy Coating |
| Weight | 3.3Kg |
Preferred Buyer From
| Location | Worldwide |
